8 Types of Landscaping Explained
One backyard might need a drain, a patio, planting and sod. Use these terms to ask who is doing each part, how it’s priced and when it needs to happen. The glossary explains the units you’ll see on your quote.

Checked November 2026. All figures are installed CAD planning allowances before GST for the specified scope. Confirm tax and line-item inclusions in writing. Labour and materials apply to the listed work. Major regrading, drainage repairs, difficult access and off-site disposal should be confirmed separately. Steep slopes, hand access and premium finishes can raise the total.
1. General landscaping
Coordinating layout, site preparation and the finished yard.
What goes in. A new backyard with patio, lawn, fence and retaining wall.
When to plan it. Begin with a measured layout and a site walkthrough.
Upkeep. Review settlement, edges and drainage after the first winter.
CAD $27,000–$52,000+ per package. 400 sq. ft. of pavers, 2,500 sq. ft. of sod, 100 linear ft. of cedar fence and 20 linear ft. of wall, 3 ft. high. BVM Builders’ 2026 price guide.
2. Softscaping
The living parts of a landscape.
What goes in. Sod, trees, shrubs and perennials in prepared soil.
When to plan it. Choose mature sizes early, then plant after equipment-intensive work.
Upkeep. Water during establishment, mow turf and prune when appropriate.
CAD $7,000–$11,250 per 2,500 sq. ft.. Full-service sod with soil prep. Trees and beds are separate. BVM Builders’ 2026 price guide.
3. Hardscaping
Built surfaces and structures in the yard.
What goes in. Patios, paths, steps and retaining walls.
When to plan it. Set drainage and any sleeves first. Build before planting.
Upkeep. Sweep joints, check edges and watch for settlement.
CAD $7,200–$18,000 per 400 sq. ft.. Paver patio with standard excavation and base preparation. Confirm disposal. BVM Builders’ 2026 price guide.
4. Xeriscaping
Water-wise design using plants suited to the site, amended soil as needed, mulch and efficient watering.
What goes in. Dense drifts of grasses and flowering perennials grouped by water needs, with a mulched or rocky surface.
When to plan it. Reduce high-water areas at layout stage and plan drip lines before paving.
Upkeep. Water during establishment, weed and replenish mulch.
CAD $1,500–$5,000 per rock garden. Installed rock garden with rocks, soil and plants. Get drip irrigation quoted separately. Kowski Construction’s rates.
5. Grading and drainage
Setting yard elevations and directing runoff.
What goes in. Regrading, a swale or a subsurface drain with an appropriate outlet.
When to plan it. Check builder drawings and existing runoff before setting patio or lawn heights.
Upkeep. Keep outlets clear and check low spots after snowmelt.
CAD $2,500–$12,000 per project. Published grading and drainage allowance. Confirm earthwork, pipe, outlet, backfill and disposal as separate lines. BVM Builders’ bed and grading rates.
6. Irrigation
Sprinklers and drip lines grouped into watering zones.
What goes in. Pipes, heads, valves, drip emitters and a controller.
When to plan it. Design for water pressure and run sleeves under paths before paving.
Upkeep. Arrange seasonal startup, test coverage and winterize before freeze-up.
CAD $900–$1,300 per zone. Installed systems with at least three zones. Confirm controller, backflow, trenching and restoration. Greenscape Irrigation’s FAQ.
7. Landscape lighting
Outdoor fixtures for safe circulation and focal points.
What goes in. Low-voltage path lights, step lighting or accent fixtures.
When to plan it. Set power and conduit routes before the patio and paths go in.
Upkeep. Clean lenses and check aim and wiring after winter.
CAD $35–$90 per installed path fixture. Path light benchmark. Ask for transformer, wiring, trenching and any project minimum separately. J.G. Irrigation’s lighting guide.
8. Edible landscaping
Integrating food plants into a yard layout.
What goes in. Raised beds, a sunny growing area or site-suitable fruiting shrubs.
When to plan it. Reserve sunlight, water access and paths in the layout. Install after heavy equipment leaves.
Upkeep. Water, renew compost, manage pests and rotate annual crops.
Request an installed price per bed. For a 4 × 8 ft. bed, compare frame material and height, soil volume and delivery, assembly and watering provisions. Shovels and Barrow’s raised-bed services.
A workable sequence for a bare Calgary yard
- Set grades and drainage. For a bare lot with a 12 × 16 ft. patio planned, review the builder drawings, confirm the grades with the builder, mark access and confirm the rough grade, runoff route and downspout discharge. Lay drain lines and any sleeves for irrigation or lighting before paving.
- Build the patio and paths. Excavate while equipment access is open. Set the surface elevations, install the compacted base and pavers, and confirm the route to the garage.
- Prepare soil and plant. Bring soil in while equipment can still reach the beds. Check tree caliper and mature spread against the plan.
- Lay sod and finish. Confirm final grade so the lawn transitions cleanly to paving and runoff stays on its planned route. Add mulch, then start establishment watering.
Review the City of Calgary’s lot drainage guidance before changing the yard. Take the sequence to your first consultation alongside a yard look you like.